Suzuki GSF1250 Service Manual page 125

P1750-L for IAP sensor No.2 (Use of SDS)
Step
1 1) Click the data monitor button (1).
2) Check the manifold absolute pressure 2 data.
Approx. 0 kPa (0 kgf/cm
2 1) Turn the ignition switch OFF.
2) Check the IAP sensor (No.2) coupler for loose or poor
contacts.
If OK, then check the IAP sensor (No.2) lead wire
continuity.
Action
1
I718H1110251-01
I718H1110183-02
3 , 0 psi) and less OK?
I718H1110168-03
Engine General Information and Diagnosis:
Yes
Go to Step 2.
Go to Step 3.
1A-56
No
Go to Step 4.
R and G/B wire open,
W/Bl wire shorted to the
ground.