Suzuki GSF1250 Service Manual page 583

• When installing the gear bushing onto the driveshaft,
align the shaft oil hole "A" with the bushing oil hole "B".
"A"
"B"
"A"
"B"
Countershaft
• Install the countershaft bearing into the housing, using
the special tool.
CAUTION
!
Never reuse countershaft bearing.
Special tool
(A): 09913–70210 (Bearing installer set)
I718H1520036-01
I718H1520037-01
(A)
I718H1520038-01
Manual Transmission:
• Install the countershaft bearing (1) to the countershaft,
using the hydraulic press and special tool.
Special tool
(A): 09913–70210 (Bearing installer set)
1
(A)
• When installing the gear bushing onto the
countershaft, align the shaft oil hole "A" with the
bushing oil hole "B".
• Apply engine oil to O-rings (4).
CAUTION
!
Replace the O-rings (4) with new ones.
1
I718H1520039-01
"A"
"B"
I718H1520040-01
4
I718H1520073-02
5B-11