Suzuki GSF1250 Service Manual page 234

1D-32 Engine Mechanical:
• The other arrow marked "2" "D" should now be
pointing straight up. Starting from the roller pin that is
directly above the arrow marked "2" "D", count out 16
roller pins (from the exhaust camshaft side going
towards the intake camshaft side).
• Engage the 16th roller pin "E" on the cam chain with
the marked "3" on the intake sprocket.
NOTE
The cam chain should now be on all three
sprockets. Be careful not to move the
crankshaft until the camshaft journal holders
and cam chain tension adjuster are secured.
"E"
• Install the dowel pins.
"D"
I718H1140065-01
I718H1140394-01
I718H1140387-01
• Install the camshaft journal holders.
CAUTION
!
Damage to head or camshaft journal holder
thrust surfaces may result if the camshaft
journal holders are not drawn down evenly.
NOTE
Each camshaft journal holder is identified
with an embossed letter.
A
C
• Fasten the camshaft journal holders evenly by
tightening the camshaft journal holder bolts lightly, in
the ascending order of numbers.
CAUTION
!
The camshaft journal holder bolts are made
of a special material and much superior in
strength, compared with other types of high
strength bolts.
Take special care not to use other types of
bolts.
NOTE
The ascending order of numbers are
indicated on the camshaft journal holders.
• Tighten the camshaft journal holder bolts in the
ascending order of numbers to the specified torque.
Tightening torque
Camshaft journal holder bolt: 10 N·m (1.0 kgf-m,
7.0 lb-ft)
B
FWD
D
I718H1140068-01