Tightening Torque - Suzuki GSF1250 Service Manual

1D-22 Engine Mechanical:
• Tighten all engine mounting bolts and nuts to the specified torque, as shown in the following illustration.
Left
1 "a"
2 "b"
(e)
1. Engine mounting bolt (Front upper)
2. Engine mounting bolt (Center lower)
3. Engine mounting bolt (Rear lower)
4. Engine mounting bolt (Rear upper)
• Apply THREAD LOCK SUPER to the driveshaft.
: Thread lock cement 99000–32030 (THREAD LOCK CEMENT SUPER 1303 or equivalent)
• Tighten the engine sprocket nut to the specified torque.

Tightening torque

Engine sprocket nut (g): 115 N·m (11.5 kgf-m, 83.0 lb-ft)
Right
(d)
2 "b"
(e)
"a": 215 mm (8.5 in)
"b": 50 mm (2.0 in)
"c": 155 mm (6.1 in)
: 55 N⋅m (5.5 kgf-m, 40.0 lb-ft)
(g)
Left
" c "
4
3
"c"
: 47 N⋅m (4.7 kgf-m, 34.0 lb-ft)
: 88 N⋅m (8.8 kgf-m, 63.5 lb-ft)
I718H1140376-01
Right
(f)
(f)
I718H1140375-02