Exhaust System Inspection; Specifications; Tightening Torque Specifications; Special Tools And Equipment - Suzuki GSF1250 Service Manual

1K-6 Exhaust System:

Exhaust System Inspection

Inspect the exhaust pipe connection and muffler
connection for exhaust gas leakage and mounting
condition. If any defect is found, replace the exhaust
pipe assembly or muffler with a new one.
Check the exhaust pipe bolts, muffler connecting bolts
and muffler mounting nut are tightened to their specified
torque.
Tightening torque
Exhaust pipe bolt (a): 23 N·m (2.3 kgf-m, 16.5 lb-ft)
Exhaust pipe mounting bolt (b): 23 N·m (2.3 kgf-m,
16.5 lb-ft)
Muffler connecting bolt (c): 23 N·m (2.3 kgf-m, 16.5
lb-ft)
Muffler mounting nut (d): 26 N·m (2.6 kgf-m, 19.0 lb-
ft)

Tightening Torque Specifications

Fastening part
HO2 sensor
Exhaust pipe bolt
Exhaust pipe mounting bolt
Muffler mounting nut
Muffler connecting bolt
NOTE
The specified tightening torque is also described in the following.
"Exhaust System Construction (Page 1K-2)"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Tightening Torque Specifications in Section
0C (Page 0C-7)".

Recommended Service Material

Material
Exhaust gas sealer
B718H11B06003

Specifications

Special Tools and Equipment

SUZUKI recommended product or Specification
PERMATEX 1372 (commercially
available)
(a)
Tightening torque
N⋅m kgf-m
25 2.5
23 2.3
23 2.3
26 2.6
23 2.3
—
(a) (d)
(c)
(b)
I718H11B0013-02
B718H11B07001
Note
lb-ft
18.0 (Page 1K-4)
(Page 1K-5) /
16.5
(Page 1K-6)
(Page 1K-5) /
16.5
(Page 1K-6)
(Page 1K-5) /
19.0
(Page 1K-6)
(Page 1K-5) /
16.5
(Page 1K-6)
B718H11B08001
Note
(Page 1K-4)