Air Cleaner Element Removal And Installation; Air Cleaner Element Inspection And Cleaning; Air Cleaner Box Removal And Installation; Throttle Cable Removal And Installation - Suzuki GSF1250 Service Manual

1D-6 Engine Mechanical:

Air Cleaner Element Removal and Installation

Removal
1) Remove the fuel tank. Refer to "Fuel Tank Removal
and Installation in Section 1G (Page 1G-9)".
2) Remove the air cleaner cover screws.
3) Remove the air cleaner cover (1).
1
4) Remove the air cleaner element (2).
Installation
Installation in the reverse order of removal.

Air Cleaner Element Inspection and Cleaning

Refer to "Air Cleaner Element Inspection and Cleaning in
Section 0B (Page 0B-3)".

Air Cleaner Box Removal and Installation

Removal
1) Remove the throttle body. Refer to "Throttle Body
Removal and Installation (Page 1D-9)".
2) Remove the air cleaner cover and air cleaner
element. Refer to "Air Cleaner Element Removal and
Installation (Page 1D-6)".
3) Release the drain hose from the clamp (1).
B718H11406034
4) Disconnect the breather hose (2) and remove the air
I718H1140310-04
2
Installation
Install the air cleaner box in the reverse order of
removal. Pay attention to the following point:
• Route the hoses properly. Refer to "Throttle Body
I718H1140311-01

Throttle Cable Removal and Installation

Removal
1) Remove the fuel tank. Refer to "Fuel Tank Removal
B718H11406035
2) Remove the right handlebar switch box. Refer to
B718H11406036
3) Remove the throttle cables as shown in the cable
cleaner box (3).
3
Construction (Page 1D-8)".
and Installation in Section 1G (Page 1G-9)".
"Handlebar Removal and Installation in Section 6B
(Page 6B-3)".
routing diagram. Refer to "Throttle Cable Routing
Diagram (Page 1D-2)".
1
I718H1140312-01
2
I718H1140313-01
B718H11406037