Front Wheel Assembly Removal And Installation - Suzuki GSF1250 Service Manual

Front Wheel Assembly Removal and Installation

Removal
1) Raise the front wheel off the ground and support the
motorcycle with a jack or a wooden block.
CAUTION
!
Do not carry out the work with the
motorcycle resting on the side-stand. Do not
support the motorcycle with the exhaust
pipes. Make sure that the motorcycle is
supported securely.
2) Remove the front wheel speed sensor by removing
the mounting bolts. (GSF1250A/SA) Refer to "Front
Wheel Speed Sensor Removal and Installation in
Section 4E (Page 4E-71)".
3) Remove the brake calipers. Refer to "Front Brake
Caliper Removal and Installation in Section 4B
(Page 4B-3)".
CAUTION
!
Do not operate the brake lever while
removing the caliper.
4) Loosen two axle pinch bolts (1) on the right front fork
leg.
5) Remove the front axle bolt (2).
2
6) Loosen two axle pinch bolts (3) on the left front fork
B718H12406003
7) Draw out the front axle and remove the front wheel.
8) Remove the collar (4) (GSF1250/S) or front wheel
I718H1240004-03
1
I718H1240005-01
leg.
NOTE
After removing the front wheel, fit the
calipers temporarily to the original positions.
3
speed sensor bracket (5) (GSF1250A/SA).
GSF1250/S
GSF1250A/SA
Wheels and Tires: 2D-6
I718H1240006-02
4
I718H1240008-02
5
I718H1240007-02