Suzuki GSF1250 Service Manual page 383

• Tighten the exhaust pipe bolts and exhaust pipe
mounting bolt to the specified torque.
Tightening torque
Exhaust pipe bolt (a): 23 N·m (2.3 kgf-m, 16.5 lb-
ft)
Exhaust pipe mounting bolt (b): 23 N·m (2.3 kgf-
m, 16.5 lb-ft)
(a)
(b)
(a)
(a)
I718H11B0016-02
I718H11B0014-01
• Route the HO2 sensor lead wire. Refer to "Throttle
Body Construction in Section 1D (Page 1D-8)" and
"Wiring Harness Routing Diagram in Section 9A
(Page 9A-8)".
• Tighten the muffler mounting nut and muffler
connecting bolts to the specified torque.
Tightening torque
Muffler mounting nut (c): 26 N·m (2.6 kgf-m, 19.0
lb-ft)
Muffler connecting bolt (d): 23 N·m (2.3 kgf-m,
16.5 lb-ft)
(c)
(d)
Exhaust System: 1K-5
I718H11B0015-02