Suzuki GSF1250 Service Manual page 95

Step
1 1) Turn the ignition switch OFF.
2) Check the CKP sensor coupler for loose or poor
contacts.
If OK, then measure the CKP sensor resistance.
3) Disconnect the CKP sensor coupler and measure the
resistance.
Special tool
(A): 09900–25008 (Multi-circuit tester set)
Tester knob indication
Resistance (Ω)
CKP sensor resistance
90 – 150 Ω (Bl /Y– G)
4) If OK, then check the continuity between each terminal
and ground.
CKP sensor continuity
∞ Ω (Infinity) (Bl/Y – Ground, G – Ground)
Are the resistance and continuity OK?
Action
I718H1110154-02
(A)
I718H1110156-03
(A)
I718H1110157-05
Engine General Information and Diagnosis:
Yes
Go to Step 2.
1A-26
No
Replace the CKP
sensor with a new one.