Suzuki GSF1250 Service Manual page 489

2) Remove the pad spring (3).
3
3) Remove the spacer (4) and rubber boot (5) from the
caliper.
4) Remove the slide pin (6).
6
5) Place a rag over the piston to prevent it from popping
out and then force out the piston using compressed
air.
CAUTION
!
Do not use high pressure air to prevent
piston damage.
6) Remove the dust seal (7) and piston seal (8).
I649G1430014-02
Assembly
Assemble the caliper in the reverse order of
disassembly. Pay attention to the following points:
• Wash the caliper bore and piston with specified brake
fluid. Particularly wash the dust seal groove and
5 piston seal groove.
BF: Brake fluid (DOT 4)
4
• Wash the caliper components with fresh
• Do not wipe the brake fluid off after
I649G1430015-03
• When washing the components, use the
I649G1430016-02
CAUTION
!
brake fluid before reassembly. Never use
cleaning solvent or gasoline to wash them.
washing the components.
specified brake fluid. Never use different
types of fluid or cleaning solvent such as
gasoline, kerosine or the others.
Rear Brakes: 4C-5
8
7
I649G1430017-02
I649G1430018-02