Suzuki GSF1250 Service Manual page 268

1D-66 Engine Mechanical:
2
"C"
"a"
"D"
"a": 1.5 – 2 graduations
Oil Pressure Regulator / Oil Strainer / Oil Pan
• Apply SUZUKI SUPER GREASE to the O-rings (1)
and install them.
CAUTION
!
Replace the O-rings (1) with new ones.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
• Apply SUZUKI SUPER GREASE to the O-rings (2)
and press in the oil strainer and oil pressure regulator
to the crankcase.
CAUTION
!
Replace the O-rings (2) with new ones.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
3
(b)
I718H1140401-03
1
I718H1140226-01
2
• Apply SUZUKI BOND to the mating surface of the oil
pan.
NOTE
• Make surfaces free from moisture, oil, dust
and other foreign materials.
• Spread the sealant on surfaces thinly to
from an even layer, and assemble the oil
pan within a few minutes.
• Apply to distorted surfaces as it forms a
comparatively thick film.
: Sealant 99000–31110 (SUZUKI BOND
No.1215 or equivalent)
2
I718H1140227-02
I718H1140228-01