Suzuki GSF1250 Service Manual page 49

Front and Rear Brake Hose Inspection
1) Remove the seat, right frame cover and fuel tank.
(GSF1250A/SA) Refer to "Exterior Parts
Construction in Section 9D (Page 9D-2)" and "Fuel
Tank Removal and Installation in Section 1G
(Page 1G-9)".
2) Inspect the brake hoses and hose joints for crack,
damage or brake oil leakage. If any defects are
found, replace the brake hose with a new one. Refer
to "Front Brake Hose Removal and Installation in
Section 4A (Page 4A-12)" and "Rear Brake Hose
Removal and Installation in Section 4A (Page 4A-
13)".
GSF1250A/SA only
3) Reinstall the removed parts. (GSF1250A/SA)
Brake Pedal Height Inspection and Adjustment
1) Inspect the brake pedal height "a" between the pedal
top face and footrest.
Adjust the brake pedal height if necessary.
Brake pedal height "a"
Standard: 50 – 60 mm (2.0 – 2.4 in)
2) Loosen the lock-nut (1).
3) Turn the push rod (2) until the brake pedal becomes
50 – 60 mm (2.0 – 2.4 in.) "a" below the top of the
I718H1020043-01
footrest.
4) Tighten the lock-nut (1) securely.
Tightening torque
Rear master cylinder rod lock-nut (a): 18 N·m (
1.8 kgf-m, 13.0 lb-ft)
I718H1020044-01
Brake Hose Replacement
Replace brake hose
Every 4 years
Refer to "Front Brake Hose Removal and Installation in
Section 4A (Page 4A-12)" and "Rear Brake Hose
Removal and Installation in Section 4A (Page 4A-13)".
Brake Fluid Replacement
Replace brake fluid
I718H1020045-01
Every 2 years
Refer to "Brake Fluid Replacement in Section 4A
(Page 4A-10)".
Maintenance and Lubrication:
GSF1250A/SA only
2
1
(a)
0B-18
I718H1020046-01
"a "
I718H1020066-07