Front Wheel Assembly Removal And Installation (Gsf650/S/U/Suk7) - Suzuki GSF650A Service Manual

Front Wheel Assembly Removal and Installation
(GSF650/S/U/SUK7)
Removal
1) Remove the brake calipers. Refer to "Front Brake
Caliper Removal and Installation in Section 4B
(Page 4B-2)".
CAUTION
!
Do not operate the brake lever while
removing the caliper.
2) Loosen axle pinch bolt (1) on the right front fork leg.
3) Loosen the front axle (2).
Special tool
(A): 09944–28320 (Hexagon socket (19
mm))
2
(A)
4) Raise the front wheel off the ground and support the
motorcycle with a jack or a wooden block.
CAUTION
!
Do not carry out the work with the
motorcycle resting on the side-stand. DO not
support the motorcycle with the exhaust
pipe. Make sure that the motorcycle is
supported securely.
5) Draw out the front axle and remove the front wheel.
B817H22406003
6) Remove the collar (3).
I717H1240002-01
Installation
1) Install the collar (1) into the left side of the wheel.
1
I717H1240003-01
NOTE
After removing the front wheel, fit the
calipers temporarily to the original positions.
1
Wheels and Tires: 2D-4
I717H1240004-01
3
I717H1240005-02
I717H1240006-02