User Guide: PTP 600 Series
PIDU Plus PTP 300/500/600 Series
The PIDU Plus PTP 300/500/600 Series
supply voltage from the mains supply (or from an external DC source) and inject this
supply voltage into the 1000BaseT Ethernet connection to the ODU. The PIDU is
connected to the ODU and network equipment using CAT5e cable with standard RJ45
connectors.
CAUTION
Figure 1-4 Power indoor unit (PIDU Plus PTP 300/500/600 Series)
Power and Ethernet LEDs
The front panel contains indicators showing the status of the power and Ethernet
connections:
•
The Power indicator is illuminated when the PIDU is receiving mains power.
•
The Ethernet indicator normally illuminates when the Ethernet link is working,
flashing when there is Ethernet activity. The fact that it lights also indicates that
the ODU is powered. At power up the LED will flash 10 times to indicate that a
correct start up sequence has occurred. See
further fault finding information.
phn-0896_009v003
Feb 2010
Care should be taken not to connect equipment other than an ODU or LPU
for the PTP 600 Series to a PIDU ODU port, as equipment damage may
occur. The PIDU Plus PTP 300/500/600 Series is not interchangeable with
the PIDU Plus PTP 400 Series.
UNDER DEVELOPMENT
PIDU Plus PTP 300/500/600 Series
(Figure
1-4) is used to generate the ODU
Chapter 7 Troubleshooting
for
1-9