Disarm On Completion - Motorola PTP 300 Series User Manual

6.6.5 Disarm on Completion

When the alignment process is complete, the installer MUST REMEMBER TO DISARM
BOTH UNITS in the link, as described in Section 7.7 "Installation Wizard". This is necessary
in order to:
•
Turn off the audible alignment aid (section 7.7.6 "Disarm")
•
Enable Adaptive Modulation
•
Fully enable Advanced Spectrum Management with i-DFS
•
Clear unwanted installation information from the various systems statistics
•
Store the link range for fast link acquisition on link drop
•
Enable higher data rates
NOTE
After 24 hours, the units will be disarmed automatically, provided that they are armed
and that the link is UP.
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
70
6 Installation