Configure Your Wireless Security Settings; Logging In - Motorola WE800G User Manual

INSTALLATION

Configure Your Wireless Security Settings

Due to the limitation of the Wi-Fi WPA Test Plan, your Wireless
Ethernet Bridge's factory default settings are not set at their
maximum security level. Adjustments are strongly recommended to
ensure that you communicate securely on your wireless network at
maximum strength. Failure to configure these settings properly could
compromise your network to wireless hackers.

Logging In

If possible, connect your computer with an Ethernet cable to the
Wireless Ethernet Bridge and not wirelessly. If you log into the
Wireless Ethernet Bridge wirelessly for the first time, someone could
be snooping and see the changes you make to passwords, thereby
compromising your security from the very start. After you have
configured the security settings, then wirelessly connecting to your
Wireless Ethernet Bridge is safe.
1 Once the Wireless Ethernet Bridge is connected, open your web
browser. Enter into the URL field http://192.168.30.1 (the
Wireless Ethernet Bridge's default IP address) and press Enter.
The login screen will appear:
2 Enter the USER ID. The default factory setting is "admin", without
the quotation marks.
3 Enter the PASSWORD. The default factory setting is "motorola",
without the quotation marks.
SECTION 2, INSTALLATION
SECTION 2
2-19