Lan Connection Configuration Table View - Motorola 68390 - Vanguard 320 Router User Manual

A p p l i c a t i o n V i e w s
SVC Addr
Network address for calls routed beyond this
node. A route selection entry is not needed for
calls destined within this node: PAD port or node
resource (for example, control port) calls. The wild
card (match anything) character is *, and can also
be part of the entry. When set to (blank), this
parameter is ignored.
Destn 1 through 8
The network address to which calls are routed.
Priority 1 through 8
The priority for call forwarding to ports within the
Route Selection Table. Call forwarding is
determined by a combination of priority and load
conditions. 0 is the backup port. Values 1-15 are
also valid, 1 being the highest priority, and 15 the
lowest.
LAN Connection Configuration Table
View
Access: From the Icon Subviews menu for the
MotWANApp Application icon, select LAN Configuration.
This view contains the Configuration parameters
for each LAN Connection. Column headings are
as follows:
D e v i c e M a n a g e m e n t
ConnNo
A specific LAN Connection Record within the
table.
Forwarder
This parameter specifies the type of forwarders
communicating over this LAN Connection.
Table 11: Type of Forwarders
Forwarder
brid
rout
brout
nc
newvalBrid
BridgeLnk
The Bridge-Link that is using this LAN
Connection.
RouterIf
The Router Interface that is using this LAN
Connection.
Page 33
S u p p o r t e d A p p l i c a t i o n s
Description
Bridging Forwarders.
Routing Forwarders.
Bridging and Routing Forwarders.
Skipped during configuration.
Same as 'brid'.
M o t o r o l a V a n g u a r d