Table of Contents
Advertisement
2 Device Installation
2.1
Installation Requirements
2.1.1 Enhanced Wireless Router (EWR)
The MEA Enhanced Wireless Router 6300 (EWR6300) is an infrastructure device positioned in
a fixed location, such as on a pole, wall, or rooftop. The device requires professional installation
to ensure the installation is performed in accordance with FCC licensing regulations.
The EWR provides range extension, a means to route around obstructions, a fixed location
reference for use in Geo-Location, and the capability of enabling IP devices.
The EWR6300 comes with a mounting bracket that can be attached to a pole with a diameter of
1-3.5 inches. For correct MEA deployment, a power source for each EWR must be provided.
2.1.2 Portable Wireless Router (PWR)
The PWR6300 Portable Wireless Router (PWR) has the same functionality as the EWR,
including network routing, Multi-Hopping®, and geo-location services, but in a smaller form. It
combines the functionality of a Wireless Router and the Wireless Modem Card into a single
device. Adding an Ethernet port to a Wireless Router enables video cameras, computers or any
other Ethernet-capable device to get high-speed access to the MEA wireless broadband
network, without the need to purchase a separate Wireless Modem Card.
The MEA Portable Wireless Router 6300 (PWR6300) is an infrastructure device positioned in a
fixed location, such as on a traffic cabinet or outdoor kiosk.
The PWR6300 provides range extension, a means to route around obstructions, a fixed location
reference for use in Geo-Location, and the capability of enabling IP devices.
2.2
Software Requirements
Two types of software interfaces will be required during the installation and setup process of the
EWR and PWR device: MeshManager and the EWR Device Administration web interface.
MeshManager software needs to be installed and running on a network computer prior to EWR
and PWR installation and configuration. MeshManager will be used in the EWR and PWR
setup process to validate the installation of the device. MeshManager software will also be
used to manage an EWR, PWR, and other subscriber devices within the MEA network.
The EWR Device Administration web interface is also utilized by the PWR and is used to
administer and configure the device. The web interface can be accessed by connecting a PC to
the wired interface. Additional information is provided later in this manual.
Detailed information about MeshManager software and its usage is found in the following
publications: QuickStart for MeshManager and MeshManager Users Guide.
2
Advertisement
Table of Contents
