The Show Config Display Described - Digital Equipment DEC 3000 500X AXP Owner's Manual

Interpreting the show Command Display
Elements in the The
show config described in Table 12–9.
Display
Table 12–9 The show config Display Described
Display Heading
TCINFO
DEVNAM
DEVSTAT
Interpreting the If no errors are detected when you enter a
show config command, you will see the message OK next to each device
Display name. If an error is detected for one or more system components,
a question mark (?) error indicator will be displayed in the
DEVSTAT column next to the corresponding device name.
If you see an error indicator next to any device name, as shown
in Figure 12–3, note the error number and the DEVNAM on the
Handling Problems worksheet at the end of Chapter 13. If you
wish, you can test the device that shows an error in the
config
12–14 Identifying a Problem
command displays three columns of information
show config
Description
TURBOchannel device information.
Information next to the TCx component
indicates which TURBOchannel option
is installed and the slot number it
occupies.
Name of system component or module.
Status of system component or module.
display by following the instructions in Chapter 13.
show config
show