Mazda RX-8 Workshop Manual page 3908

< Previous Next >
2011 - RX-8 - Body and Accessories
FRONT FOG LIGHT BULB REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the front fog light. (See
3. Disconnect the connector.
4. Remove the front fog light bulb by turning it in the direction of the arrow.
CAUTION:
A halogen bulb generates extremely high heat when it is illuminated. If the surface of the
bulb is soiled, excessive heat will build up and the life of the bulb will be shortened. When
handling the bulb, hold the flange, not the glass.
5. Install in the reverse order of removal.
FRONT FOG LIGHT REMOVAL/INSTALLATION.)