Mazda RX-8 Workshop Manual page 3893

< Previous Next >
2011 - RX-8 - Body and Accessories
MAP LIGHT REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the screws.
3. Remove the map light. (See
4. Disconnect the connector.
5. Remove the socket, then remove the map light bulb.
6. Install in the reverse order of removal.
Map Light Removal Note
1. Insert a tape-wrapped flathead screwdriver into the gap between the headliner and the map
light.
2. Press the tab, and remove the map light.
Map Light Removal Note.)