Mazda RX-8 Workshop Manual page 3851

< Previous Next >
2011 - RX-8 - Body and Accessories
FLOOR COVERING REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the following parts:
a. Front seat (See
b. Rear seat cushion (See
c. Rear seat back (See
d. Inner scuff plate (See
e. Ashtray illumination bulb (See
REMOVAL/INSTALLATION.)
f. Console (See
g. Front side trim (See
h. Tire house trim (See
i. Seat belt rail (See
3. Remove fasteners A, B, and C.
4. Detach clip D and remove the floor covering.
FRONT SEAT REMOVAL/INSTALLATION.)
REAR SEAT
REAR SEAT REMOVAL/INSTALLATION.)
INNER SCUFF PLATE
ASHTRAY ILLUMINATION BULB
CONSOLE REMOVAL/INSTALLATION.)
FRONT SIDE TRIM
TIRE HOUSE TRIM
FRONT SEAT BELT
REMOVAL/INSTALLATION.)
REMOVAL/INSTALLATION.)
REMOVAL/INSTALLATION.)
REMOVAL/INSTALLATION.)
REMOVAL/INSTALLATION.)