Mazda RX-8 Workshop Manual page 3917

< Previous Next >
2011 - RX-8 - Body and Accessories
LIGHT SWITCH INSPECTION
Vehicle Without Auto Light System
1. Remove the column cover. (See
2. Remove the ignition key illumination. (See
REMOVAL/INSTALLATION.)
3. Remove the light switch. (See
4. Verify that the continuity between the light switch terminals is as indicated in the table.
If not as indicated in the table, replace the light switch.
COLUMN COVER REMOVAL/INSTALLATION.)
IGNITION KEY ILLUMINATION BULB
LIGHT SWITCH REMOVAL/INSTALLATION.)
Headlight switch