Chapter 5 Packet Filtering and Access Control Rule Configuration
Command
ZXR10_FW.pf #rule delete id <number>
Parameter Description:
Parameter
<number>
8. Viewing packet filtering rule.
Command
ZXR10_FW.pf #rule show
Packet Filtering Policy Configuration
Example
Packet Filtering Policy Configuration Example
One
The most basic function of FW is to control communication between
intranet and extranet. MAC address can be used to directly identify
one network device. FW card supports to filter packets based on
MAC address. Only packets whose MAC address meets packet fil-
tering rule can pass through FW and access destination area. With
MAC address filtering technology, only authorized MAC address
can access network resources. In the
host in Area_Vlan2 and whose MAC address is 00:50:04:C3:B0:31
to access document server (port 8000 in 192.168.83.234/24) in
Area_Vlan1.
Confidential and Proprietary Information of ZTE CORPORATION
Description
This is rule id.
Figure
Function
This deletes one
packet filtering rule.
Function
This shows packet
filtering rule.
1, only forbid the
73