Mitsubishi Electric FR-A700 Instruction Manual page 28

Removal and reinstallation of the front cover
Reinstallation
Insert the two fixed hooks on the left side of the front cover 2 into the sockets of the inverter.
Using the fixed hooks as supports, securely press the front cover 2 against the inverter.
(Although installation can be done with the operation panel mounted, make sure that a
connector is securely fixed.)
Fix the front cover 2 with the installation screws.
Fix the front cover 1 with the installation screws.
Fig. 2-5: Reinstallation of the front cover
NOTES For the FR-A740-04320 or more, the front cover 1 is separated into two parts.
Fully make sure that the front cover has been reinstalled securely. Always tighten the instal-
lation screws of the front cover.
The same serial number is printed on the capacity plate of the front cover and the rating
plate of the inverter. Before reinstalling the front cover, check the serial numbers to ensure
that the cover removed is reinstalled to the inverter from where it was removed.
2 - 4
Insert hooks into the sockets
Fix front cover 2 with the
installation screws
Front cover 2
Press front cover 2 against the inverter
Fix front cover 1 with the
installation screws
Front cover 1
Installation
I000995E