Mitsubishi Electric FR-A700 Instruction Manual page 473

Parameter
The following functions that can be set as second or third functions:
Funktion
Torque boost
Base frequency
Acceleration time
Deceleration time
Electronic thermal relay
function
Stall prevention
Applied motor
Motor constants
Online auto tuning selec-
tion
Motor control method
Speed control gain
Analog input filter
Speed detection filter
Torque control gain
Torque detection filter
Tab. 6-84: Functions that can be set as second or third functions
NOTES The RT signal is assigned to the RT terminal in the initial setting. By setting "3" to any of
Pr. 178 to Pr. 189 "Input terminal function selection", the RT signal can be assigned to the
other terminal.
When the RT (X9) signal is on, the other functions such as the second (third) acceleration/
deceleration time are also selected.
Changing the terminal assignment using Pr. 178 to Pr. 189 "Input terminal function selec-
tion" may affect the other functions. Please make setting after confirming the function of
each terminal.
FR-A700 EC
Parameter Number as
First function Second function
Pr. 0
Pr. 3
Pr. 7
Pr. 8
Pr. 9
Pr. 22
Pr. 71
Pr. 80–Pr. 84, Pr. 89, Pr. 453–Pr. 457,
Pr. 90–Pr. 94, Pr. 96, Pr. 569, Pr. 458–Pr. 462,
Pr. 859 Pr. 463, Pr. 860
Pr. 95
Pr. 800
Pr. 820, Pr. 821 Pr. 830, Pr. 831
Pr. 822, Pr. 826 Pr. 832, Pr. 836
Pr. 823
Pr. 824, Pr. 825 Pr. 834, Pr. 835
Pr. 827
Function assignment of external terminals
Third function
Pr. 46
Pr. 47
Pr. 44
Pr. 44, Pr. 45 Pr. 110, Pr. 111
Pr. 51
Pr. 48, Pr. 49 Pr. 114, Pr. 115
Pr. 450
Pr. 574
Pr. 451
Pr. 833
Pr. 837
Refer to
Page
Pr. 112 6-147
Pr. 113 6-172
Pr. 110 6-195
6-195
— 6-212
6-155
— 6-218
— 6-222
— 6-236
— 6-70
— 6-88
— 6-380
— 6-144
— 6-124
— 6-144
6 - 293