Removal And Reinstallation Of The Front Cover; Fr-A740-00023 To 00620-Ec - Mitsubishi Electric FR-A700 Instruction Manual

Removal and reinstallation of the front cover

2.2 Removal and reinstallation of the front cover
2.2.1

FR-A740-00023 to 00620-EC

Removal
Loosen the installation screws of the front cover.
Pull the front cover toward you to remove by pushing an installation hook using left fixed
hooks as supports.
Loosen the screws
Fig. 2-2: Removal of the front cover
Reinstallation
Insert the two fixed hooks on the left side of the front cover into the sockets of the inverter.
Using the fixed hooks as supports, securely press the front cover against the inverter.
(Although installation can be done with the operation panel mounted, make sure that a
connector is securely fixed.)
Tighten the installation screws and fix the front cover.
Insert hooks into the sockets
Fig. 2-3: Reinstallation of the front cover
2 - 2
Remove front cover
Press front cover against the inverter Tighten the installation screws
Installation
Installation hook
I000992E
I000993E