Mitsubishi Electric FR-A700 Instruction Manual page 505

Parameter
NOTES
By setting "0" in Pr. 52, the monitoring of output frequency to alarm display can be selected
in sequence by the SET key.
When the operation panel (FR-DU07) is used, the displayed units are Hz, V and A only and
the others are not displayed.
The monitor set in Pr. 52 is displayed in the third monitor position. (The output voltage mon-
itor is changed.)
The monitor displayed at powering on is the first monitor. Display the monitor to be displayed
on the first monitor and press the SET key for 1s. (To return to the output frequency monitor,
hold down the SET key for 1s after displaying the output frequency monitor.)
Power on monitor (first monitor) Second monitor
Output frequency
Fig. 6-143: Displaying various types of monitor
Example
When Pr. 52 is set to "20" (cumulative energizing time), the monitor is displayed on the oper-
ation panel as described below.
Power on monitor (first monitor) Second monitor
Output frequency
Fig. 6-144: Selection of the third monitor
FR-A700 EC
Third monitor
Output current Output voltage
Third monitor
Output current Cumulative energizing time
Monitor display and monitor output signals
Alarm monitor
I001159E
Alarm monitor
I001160C
6 - 325