Mitsubishi Electric FR-A700 Instruction Manual page 202

Parameter overview
Parameter
Func-
Name
tion
80 Motor capacity
81 Number of motor poles
Speed control gain
89
(magnetic flux vector)
Second motor control
451
method selection
Second motor capacity
453
Number of second
454
motor poles
Second motor speed
569
control gain
Tab. 6-1: Parameter overview (22)
6 - 22
Incre- Initial Setting
ments Value Range
0.4–55kW/
0.01kW/
0–3600kW *
9999
0.1kW *
9999
2/4/6/8/10
12/14/16/
1 9999
18/20
9999
0–200%
0.1% 9999
9999
10/11/12
1 9999
20/9999
0.01kW/ 0.4–55kW/
9999
0.1kW * 0–3600kW *
1 9999 2/4/6/8/10
0–200%
0.1% 9999
9999
Description
Set the applied motor capacity.
* The increments and setting
range differ according to the
inverter capacity.
(01800 or less/02160 or more)
V/f control is performed.
Set the number of motor poles.
X18 signal-
Set 10 + number
ON:
of motor poles.
V/f control
V/f control is performed.
Motor speed fluctuation due to
load fluctuation is adjusted during
advanced magnetic flux vector
control.
100% is a referenced value.
Gain matching with the motor set
in Pr. 71.
Select the method of controlling
the second motor. (same as
Pr. 800)
V/f Control (advanced magnetic
flux vector control)
Set the capacity of the second
motor.
* The increments and setting
range differ according to the
inverter capacity.
(01800 or less/02160 or more)
V/f control is performed.
Set the number of poles of the
second motor.
V/f control is performed.
Second motor speed fluctuation
due to load fluctuation is adjusted
during advanced magnetic flux
vector control.
100% is a referenced value.
Gain matching with the motor set
in Pr. 450.
Parameter
All
Para- Para-
para-
meter meter
meter
copy clear
Refer
clear
to
page
✔: enabled
—: disabled
✔ ✔ ✔
✔ ✔ ✔
✔ ✔
—
6-171
✔ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔
✔ ✔
—