Du/Pu Monitor Display Selection (Pr. 52, Pr. 54, Pr. 158, Pr. 170, Pr. 171, Pr. 268, Pr. 563, Pr. 564, Pr. 891) - Mitsubishi Electric FR-A700 Instruction Manual

Parameter
6.15.2 DU/PU monitor display selection (Pr. 52, Pr. 54, Pr. 158, Pr. 170, Pr. 171,
Pr. 268, Pr. 563, Pr. 564, Pr. 891)
The monitor to be displayed on the main screen of the operation panel (FR-DU07)/parameter
unit (FR-PU04/FR-PU07) can be selected.
In addition, signals to be output from the terminal CA (analog current output) and AM (analog
voltage output) can be selected.
Pr.
Name
No.
DU/PU main display data
52
selection
CA terminal function
54
selection
AM terminal function
158
selection
170
Watt-hour meter clear
Operation hour meter
171
clear
Monitor decimal digits
268
selection
Energizing time
563
carrying-over times
Operating time carrying-
564
over times
Cumulative power
891
monitor digit shifted
times
The above parameters allow its setting to be changed during operation in any operation
mode even if "0" (initial value) is set in Pr. 77 "Parameter write selection".
FR-A700 EC
Initial Setting
Description
Value Range
0/5–14/
Select the monitor to be displayed on the
0 17–20/
(output 22–25/ operation panel and parameter unit. Refer
frequency) 32–35/
to Tab. 6-92 for monitor description.
50–57/100
1–3/5–14/
Select the monitor output to terminal CA.
1 17/18/21/
(output 24/32–34/
frequency) 50/52/
Select the monitor output to terminal AM.
53/70
Set "0" to clear the watt-hour meter
0
monitor.
Set the maximum value when monitoring
9999 10
from communication to 0 to 9999kWh.
Set the maximum value when monitoring
9999
from communication to 0 to 65535kWh.
Set "0" in the parameter to clear the watt-
9999 0/9999 hour monitor.
Setting "9999" has no effect.
0 Displays as integral value.
9999 1 Displayed in 0.1 increments.
9999 No function
The numbers of cumulative energizing
0–65535
time monitor exceeded 65535h is dis-
0 (reading
played.
only)
Reading only
0–65535 The numbers of operation time monitor
0 (reading exceeded 65535h is displayed.
only) Reading only
Set the number of times to shift the
0–4 cumulative power monitor digit.
Clamp the monitoring value at maximum.
9999
No shift
9999 The monitor value is cleared when it
exceeds the maximum value.
Monitor display and monitor output signals
Parameters referred to
37 Speed display
144 Speed setting
switchover
55 Frequency
monitoring
reference
56 Current
monitoring
reference
866 Torque monitor-
ing reference
291 Pulse train I/O
selection
Refer to
Section
6.15.1
6.15.1
6.15.3
6.15.3
6.15.3
6.15.4
6 - 321