Rep 13.13 Transport Roll Assembly - Xerox DocuPrint N2125 Service Manual

REP 13.13 Transport Roll Assembly

Parts List on PL 12.2
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the Envelope Feeder from the printer.
2. Remove the Bottom Cover (REP 13.1).
3. Remove the Top Chute (REP 13.2).
4. Remove the Envelope Feeder PWB
5. Remove the Gear Cover (REP 13.11).
6. Remove the Torque Clutch and Bearing from Transport Roll Assembly
7. Move the right bearing and Transport Roll Shaft to the left until it is free of the right sup-
port (Figure 2).
8. Lift and remove the Transport Roll Assembly
Figure 1 Torque Clutch
Figure 2 Transport Roll Assembly
Initial Issue
DocuPrint N2125
WARNING
(REP 13.3).
(Figure
(Figure 2).
Replacement
1. Reinstall the components in the reverse order.
1).
02/2000
4-109
Repair-Adjustment
REP 13.13