Rep 12.5 Drive Cover; Rep 12.6 Connector Chute Assembly - Xerox DocuPrint N2125 Service Manual

REP 12.5 Drive Cover

Parts List on PL 13.1
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the Duplex Assembly (REP
2. Remove the two screws that secure the cover
3. Remove the Drive Cover (Figure 1).
Figure 1 Drive Cover
Replacement
1. Reinstall the components in the reverse order.
Initial Issue
DocuPrint N2125
WARNING
12.1).
(Figure 1).

REP 12.6 Connector Chute Assembly

Parts List on PL 13.1
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the Duplex Assembly
2. Remove the Duplex Cover (REP
3. Remove the Drive Cover (REP
4. Remove the Duplex PWB (REP
5. Remove the connector harness from all cable clamps and pull connector through the hole
in the frame (Figure 1).
6. Remove the two screws that secure the Connector Chute Assembly
Figure 1 Connector Chute Assembly
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-95
WARNING
(REP 12.1).
12.3).
12.5).
12.4). Only disconnect P/J39 (Figure
(Figure
Repair-Adjustment
REP 12.5, REP 12.6
1).
1).