RRP 13.13 Transport Roller Assembly
See the Parts List on
Warning: Switch off the power and disconnect the Power Cord.
1.
Remove the Envelope Feeder from the printer.
2.
Remove the Bottom Cover
3.
Remove the Top Chute
4.
Remove the Envelope Feeder PWB
page 6-159).
5.
Remove the Gear Cover
Note:
The gears are not captive on their shafts and can fall off.
6.
Remove the Torque Clutch and Bearing from Transport Roller Assembly.
7.
Move the right bearing and Transport Roller Shaft to the left until it is free of the
right support.
8.
Lift and remove the Transport Roller Assembly.
Torque Clutch and Bearing
Transport Roller Assembly
Phaser 4400 Laser Printer Service Manual
page
7-32.
(RRP 13.1 Bottom Cover
(RRP 13.2 Top Chute
(RRP 13.11 Gear Cover
on page 6-157).
on page 6-158).
(RRP 13.3 Envelope Feeder PWB
on page 6-167).
on
6-169