Rep 13.15 Feed Roll Assembly 1 - Xerox DocuPrint N2125 Service Manual

REP 13.15 Feed Roll Assembly 1

Parts List on PL 12.2
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the Envelope Feeder from the printer.
2. Remove the Bottom Cover (REP 13.1).
3. Remove the Top Chute (REP 13.2).
4. Remove the No Paper Actuator (REP
5. Remove the Envelope Feeder PWB
6. Remove the Gear Cover (REP 13.11).
7. Remove the Feed Clutch (REP 13.12).
8. Remove the Torque Clutch, Gear, and Bearing from the Roll Feed shaft
9. Slide the Feed Roll Shaft and bearing to the left until it is free of the right mounting
2).
10. Lift the right end and remove assembly from the feed belts
11. If replacing the feeder rolls, remove the rolls from the assembly
Figure 1 Bearing
Initial Issue
DocuPrint N2125
WARNING
13.9).
(REP 13.3).
(Figure
(Figure 2).
(Figure 3).
1).
(Figure
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-111
Figure 2 Feed Roll Shaft
Figure 3 Feed Roll Assembly 1
Repair-Adjustment
REP 13.15