Gp 2.9 To Reset Fuser; Gp 2.10 Reset Menu - Xerox DocuPrint N2125 Service Manual

GP 2.9 To Reset Fuser

1. Power down printer.
2. Simultaneously hold keys 2 and 6 down.
3. Power up printer, wait for message "IOT?" to appear on the LCD.
4. Release both keys, then simultaneously press keys 0 and 5 to activate the fuser reset
function. If keys 0 and 5 are not pressed within 5 seconds of the "IOT?" message, printer
will go to the normal boot process.
5. Wait for message "Reset Completed. Please reboot" to appear on the LCD then release
both keys.
6. Power off, power on.
General Procedures / Information
GP 2.9 , GP 2.10

GP 2.10 Reset Menu

1. Power down printer.
2. Simultaneously hold keys 0 and 4 down.
3. Power up printer, wait for first * to display on the LCD line 1 then release both keys.
4. Let printer go to Ready mode.
5. Press 1 or 5 to scroll to Reset Menu.
6. Press 2 or 6 to select Reset items (Table 1)
7. Press 3 or 7 to change the values.
NOTE: After execution all values except Demo Mode will return to "Default" value
8. Press Enter to execute.
Reset Menu Item
Factory Defaults
Network Defaults
Demo Mode
Delete All Jobs
Disk Initialize
Disk Format
Flash Format
02/2000
6-22
Table 1 Reset Menu
Reset Menu Values
Yes (resets USB, System PCC, Tray, and Par-
allel menu).
No (default)
Yes (resets Ethernet and Novell menu).
No (default)
Yes
No (default)
Yes (Hard drive installed)
No (default)
Yes (Hard drive installed)
No (default)
Yes (Hard drive installed)
No (default)
Yes (Flash DIMM installed)
No (default)
DocuPrint N2125
Initial Issue