Rep 1.5 Right Cover - Xerox DocuPrint N2125 Service Manual

REP 1.5 Right Cover

Parts List on PL 1.1
Removal
Switch off the power and disconnect the Power Cord.
1. Remove Tray 1.
2. Remove the Front Cover Assembly
3. Remove the Left Front Cover (REP
4. Open the Rear Cover Assembly.
5. Remove the Top Cover Assembly (REP
6. Remove the four screws securing the Right Cover
NOTE: On printers without an optional feeder, slide the right edge of the printer over the
edge of the stand/table by approximately 1 inch.
7. Lower the cover to disconnect the three hooks at the top and bottom of the Right Cover
(Figure 1).
Initial Issue
DocuPrint N2125
WARNING
(REP 1.6).
1.7).
1.4).
(Figure 1).
8. Remove the Right Cover (Figure
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-7
1).
Figure 1 Right Cover
Repair-Adjustment
REP 1.5