Rep 13.17 Feed Belts - Xerox DocuPrint N2125 Service Manual

REP 13.17 Feed Belts

Parts List on PL 12.2
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the Envelope Feeder from the printer.
2. Remove the Bottom Cover (REP 13.1).
3. Remove the Top Chute (REP 13.2).
4. Remove the Envelope Feeder PWB
5. Remove the Gear Cover (REP 13.11).
6. Remove the Feed Clutch (REP 13.12).
7. Remove the Bottom Roll Assembly
8. Remove the Feed Roll Assembly 1
9. Remove the two pinch rolls from under the feed belts
10. Rotate one side of the belt and slide it through the slot in the frame
the belts.
Figure 1 Pinch Roll
Initial Issue
DocuPrint N2125
WARNING
(REP 13.3).
(REP 13.14).
(REP 13.15).
(Figure 1).
(Figure 2). Remove
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-113
Figure 2 Feed Belts
Repair-Adjustment
REP 13.17