Xerox DocuPrint N2125 Service Manual page 271

Drive transmission to the Feeder Assembly
As shown in Figure 4, the mechanical energy created by the Main Motor Assembly is transmit-
ted through the Drive Gear Assembly, Turn Clutch Assembly, and idle gears to the Feed Clutch
Assembly. When the Feed Clutch Assembly actuates, it transmits the energy to the Feed Roll
Assembly.
Figure 4 Drive transmission to the Feeder Assembly
Initial Issue
DocuPrint N2125
Drive transmission to the Rubber Registration Roll Assembly
As shown Figure 5, the mechanical energy created by the Main Motor Assembly is transmitted
through the Drive Gear Assembly to the Registration Clutch that is located on the end of the
Rubber Registration Roll.
Figure 5 Drive transmission to the Rubber Registration Roll
02/2000
6-31
General Procedures / Information
GP 3.3