Image Quality Checkout - Xerox DocuPrint N2125 Service Manual

Image Quality Checkout

The System Controller Test Print is used to evaluate and ensure that the printed image meets
the printer specifications.
Use new paper, whenever possible, to check the image quality of prints. Make five (5) prints of
the System Controller Test Print (Figure
prints for image quality analysis.
The Image quality Checkout is used to evaluate the following:
1. Resolution (2 places) (Figure 1)
2. Skips and Smears (4 places) (Figure
3. Registration (1 place) (Figure 1)
4. Resolution and Uniformity (2 places)
5. Solid Area Density (3 places) (Figure
6. Half Tone Resolution (2 places). (Figure
Go to Solid Area Density.
Initial Issue
DocuPrint N2125
1). Discard the first two prints and retain the remaining
1)
(Figure 1)
1)
1)
Figure 1 System Controller Test Print.
02/2000
3-5
Image Quality Repair Analysis Procedures
Image Quality Checkout