Xerox DocuPrint N2125 Service Manual page 270

Drive transmission to the MBF Roll Assembly
As shown in Figure 2, the mechanical energy created by the Main Motor Assembly is transmit-
ted through Gear 14 to the Pick Up Gear that drives the MBF Roll Assembly. When the Pick Up
Solenoid actuates, it transmits the energy from Gear 14 to the Pick Up Gear that is located on
the end of the MBF Shaft Assembly.
Figure 2 Drive transmission to the MBF Roll Assembly
General Procedures / Information
GP 3.3
Drive transmission to the Turn Roll Assembly
As shown in Figure 3, the mechanical energy created by the Main Motor Assembly is transmit-
ted through the Drive Gear Assembly to the Turn Clutch Assembly. When the Turn Clutch
Assembly actuates it transmits the energy to the Turn Roll Assembly.
Figure 3 Drive transmission to the Turn Roll Assembly
02/2000
6-30
Initial Issue
DocuPrint N2125