Xerox DocuPrint N2125 Service Manual page 285

Network laser printer
Hide thumbs Also See for DocuPrint N2125:
Table of Contents

Advertisement

Figure 2 shows a cut-off view of the printer, to better illustrate the components involved in the
Option Feeder Assembly paper path.
Figure 2 The Option Feeder Paper Path
Initial Issue
DocuPrint N2125
Drive Flow
As shown in Figure 3, the mechanical power generated by the Main Motor Assembly is trans-
mitted to the gears of the Option Feeder Assembly
Figure 3 Option Feeder Drive Flow
Function of Major Components
Figure 4 shows the major components of the Option Feeder Assembly.
Turn Clutch Assembly
Consists of a gear and an electric clutch located on the end of the Turn Roll Assembly shaft.
This clutch controls the transmission of the drive power from Gear 4 of the Standard Feeder
Assembly to the Turn Roll Assembly by turning on and off the Turn Roll clutch. When this clutch
is activated, the drive power is transmitted to the Turn Roll Assembly through the Gear OPT to
the gear of the Clutch Assembly Feed.
02/2000
6-45
General Procedures / Information
GP 3.12 , GP 3.13

Advertisement

Table of Contents
loading

Table of Contents