Rep 13.14 Bottom Roll Assembly - Xerox DocuPrint N2125 Service Manual

REP 13.14 Bottom Roll Assembly

Parts List on PL 12.2
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the Envelope Feeder from the printer.
2. Remove the Bottom Cover (REP 13.1).
3. Remove the Top Chute (REP 13.2).
4. Remove the Envelope Feeder PWB
5. Remove the Gear Cover (REP 13.11).
6. Remove the Torque Clutch (Figure
7. Remove the Feed Clutch (Figure 1).
8. Remove the one way clutch and bearing from the Bottom Roll Assembly shaft
9. Slide the Bottom Roll Assembly and the right bearing to the left until free of the mounting
(Figure 2).
10. Raise the right end of the shaft and remove
Figure 1 Torque Clutch
Repair-Adjustment
REP 13.14
WARNING
(REP 13.3).
1).
(Figure 3).
(Figure 2).
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-110
Figure 2 Clutch and Bearing
Figure 3 Bottom Roll Assembly
Initial Issue
DocuPrint N2125