Gp 1.8 Options; Gp 1.9 Optional Feeder Specifications - Xerox DocuPrint N2125 Service Manual

GP 1.8 Options

There are several customer installed options available for the N2125 printer (Table 1).
Table 1 Options
Option Description
550 Sheet Paper Feeder Provides 550 sheet continuous feed when used in con-
Customer Order Number: junction with the 550 sheet Paper Tray.
97S02377 You can install one or two 550 Sheet Paper Feeders.
550 Sheet Paper Tray Used with the 550 Sheet Paper Feeder. The Tray holds
Customer Order Number: 550 sheets of paper.
109R00448
Cover Assembly Rear Face Up The tray can hold 120 sheets of 20 lb. paper or 13mm
Customer Order Number: (.5") stack height.
97S02406
Duplex Assembly Provides duplex (two sided) printing capability.
Customer Order Number:
97S02379
Offset Catch Tray (OCT) Offsets each set of printouts by 1.1 inches (2.8 cm).
Customer Order Number: The tray holds up to 500 sheets of paper, in four different
97S02380 paper sizes.
Envelope Feeder Provides continuous envelope feed.
Customer Order Number:
97S02388
General Procedures / Information
GP 1.8 , GP 1.9

GP 1.9 Optional Feeder Specifications

The Optional Feeder Assembly consists of a 550 Sheet Paper Tray and a 550 sheet feeder.
The feeder contains the mechanism to feed paper out of the 550 Sheet Paper Tray.
The Optional Feeder Assembly can be used as the second and the third feeder on the printer.
If two Optional feeders are installed, the bottom feeder is designated Feeder 3, and the middle
feeder is designated Feeder 2 (Figure 1).
02/2000
6-12
Figure 1 Optional Feeders
Initial Issue
DocuPrint N2125