Rep 9.5 Lvps Pwb; Rep 9.6 Hvps Pwb - Xerox DocuPrint N2125 Service Manual

REP 9.5 LVPS PWB

Parts List on PL 10.1
Removal
These components are susceptible to electrostatic discharge. Observe all ESD procedures to
avoid damage.
Switch off the power and disconnect the Power Cord.
1. Remove Tray 1.
2. Remove the Left Interface Cover Assembly
3. Remove the Left Cover (REP 1.2).
4. Remove the Front Cover Assembly
5. Remove the Left Front Cover (REP
6. Remove the Left Plate Assembly (REP
7. Remove Plate Handle (REP 1.12).
8. Disconnect the Main Switch (Figure
9. Disconnect P/J11, PN1, P/J282, P/J283, P/J284, P/J285 and P/J281.
10. Remove the four screws that secure the LVPS PWB to the printer
11. Remove the LVPS PWB (Figure 1).
Figure 1 LVPS PWB
Replacement
1. Reinstall the components in the reverse order.
Repair-Adjustment
REP 9.5, REP 9.6
CAUTION
WARNING
(REP 1.1).
(REP 1.6).
1.7).
1.11).
1).
(Figure 1).

REP 9.6 HVPS PWB

Parts List on PL 10.1
Removal
These components are susceptible to electrostatic discharge. Observe all ESD procedures to
avoid damage.
Switch off the power and disconnect the Power Cord.
1. Remove Tray 1.
2. Remove the Front Cover Assembly
3. Remove the Left Front Cover
4. Remove the MBF Chute Assembly
5. Remove the Paper Handler Assembly
6. Remove the BTR Assembly
7. Remove the Transport Chute Assembly
8. Disconnect P/J261 from the HVPS PWB
9. Disconnect PRB (red) (Figure
10. Remove the screw that secures the HVPS PWB housing to the printer
11. Remove the HVPS Assembly Housing from the printer
12. Carefully disconnect the DTS (white) and TR (red) wires from the HVPS
13. Releasing the two hooks that secure the HVPS PWB to the Housing, remove the HVPS
PWB (Figure 2).
Figure 1 Transport Chute Assembly
02/2000
4-60
CAUTION
WARNING
(REP 1.6).
(REP 1.7).
(REP 4.1).
(REP 5.1).
(REP 7.1).
(REP 6.1).
(Figure 1).
1).
(Figure 1).
(Figure 1).
(Figure 2).
Initial Issue
DocuPrint N2125