REP 2.2 Friction Clutch Assembly
Parts List on
PL 2.2
Removal
Switch off the power and disconnect the Power Cord.
1.
Remove Tray 1.
2.
Release the left and right latches of Tray 1
3.
Open the Retard Chute
(Figure
1).
4.
Lift the locking tab and remove the Retard Roll Assembly
5.
Remove the Friction Clutch Assembly from the shaft
Replacement
1.
Reinstall the components in the reverse order.
Figure 1 Tray 1 Latches
Repair-Adjustment
REP 2.2
WARNING
(Figure
1).
(Figure
2).
(Figure
3).
Figure 3 Friction Clutch Assembly
02/2000
4-14
Figure 2 MBF Feed Roll
Initial Issue
DocuPrint N2125