Xerox DocuPrint N2125 Service Manual page 313

Print Engine Controller PWB <=> Fuser Assembly
Print Engine Controller PWB <=> Fuser Assembly
Table 6 shows the signal names for the Print Engine Controller PWB <=> Fuser Assembly path:
Table 6 Signal Names
Signal Name Description
/EXIT Signal from the Exit Sensor. This signal is Low (0V) when the Exit Sensor
is activated, and High (3.3V) when deactuated.
STS Signal from the Temperature Sensor which monitors the Fuser Heat Roll
temperature. (Analog)
Initial Issue
DocuPrint N2125
(Figure 10) (Table 6)
Figure 10 Print Engine Controller PWB <=> Fuser Assembly
02/2000
7-13
Wiring Data
Base Engine