Xerox DocuPrint N2125 Service Manual page 219

Introduction
Overview
The Parts List section provides exploded view illustrations of
all spared subsystem components and a listing of the
corresponding part numbers. The illustrations show the
relationships between parts.
Organization of this Section
The following elements make up the Parts List section:
Parts Lists (PL)
Each item number in the part numbers listing corresponds to
an item number in the illustration. All the parts in a given
subsystem of the machine will be located in the same
illustration or in a series of associated illustrations. The parts
which are not spared are indicated by "- -" in the Part column.
Exploded View Illustrations
An item that is called out on an illustration has a
corresponding listing within this section.
Components are given item numbers that correspond to the
part number listings.
Hardware items are lettered. All hardware dimensions are in
millimeters unless otherwise noted.
Assemblies and kits are a combination of several separate
components. A bracket is used on the illustration when an
assembly or kit is spared but is not shown. The item number
of the assembly or kit precedes the bracket; the item numbers
of the piece parts follow it.
Part Number Index
This index lists all the spared parts in the system in numerical
order. Each number is followed by a reference to the parts list
on which the part may be found.
Other Information
Abbreviations
Abbreviations which may be used in the parts lists text or
illustrations are as follows:
US ------ United States Parts Distribution System
Initial Issue
DocuPrint N2125
XE ------ European Parts Distribution System
AO ------ South America Parts Distribution System
XCL ------ Canada Parts Distribution System
P/J ------ Plug/Jack
P/O ------ Part of
W/ ------ With
W/O ------ Without
Tag
A Tag is used when a part or area of the system has been modified. The Change Tag Index, which is found in the General
Procedures/Information Section, lists the name and purpose of the Tag. In some cases, you will go to the parts lists and find a
part number listed as "with Tag." Go to the Change Tag Index for a description of what the Tag is and what you need to install the
Tag. The Change Tag Index will either list a kit number or indicate "piece part." If "piece part" is indicated, the parts lists
reference(s) will be given and all parts associated with the Tag will have to be individually located, ordered, and installed.
The notation "P/O Tag" after a part number indicates that the item is part of a Tag. The notation "Tag" after a part number will be
used only to indicate the entire Tag, whether that is a kit number or an individual part.
Whenever you install a Tag kit or all the piece parts that make up a Tag, mark the appropriate number on the Tag matrix.
Using the Parts List
1. The numbers shown in each illustration correspond to the parts list number for that illustration.
2. Throughout this manual, parts are identified by the prefix "PL", followed by a number, a decimal point, and another number.
For example, PL3.1.12 means the part is item 12 of parts list 3.1.
3. The capital letters "C", "E", and "S" shown in an illustration stand for C-ring, E-ring, and Screw, respectively.
4. A shaded triangle t in an illustration indicates the item is part of an assembly.
5. The notation "with X~Y" following an part name indicates an assembly that is made up of components X through Y. For
example, "1 (with 2~4)" means part 1 consists of part 2, part 3, and part 4.
6. The notation "RS" means that the part is a requested spare. Part numbers for these parts will be provided as soon as they
are available.
7. An asterisk * following a part name indicates the page contains a note about this part.
8. The notation "J1<>J2 and P2" is attached to a wire harness. It indicates that connector jack 1 is attached to one end of the
wire harness and connector jack 2 is attached to the other end that is plugged into plug 2.
9. A notation "(part of item 1.1)" indicates that the part is included with item 1.2.1 (PL1.2, line item 1).
02/2000
5-3
Parts-list
Introduction