Rep 9.7 Connector Pwb - Xerox DocuPrint N2125 Service Manual

Figure 2 HVPS PWB
Replacement
1. Reinstall the components in the reverse order.
Initial Issue
DocuPrint N2125

REP 9.7 Connector PWB

Parts List on PL 10.1
Removal
These components are susceptible to electrostatic discharge. Observe all ESD procedures to
avoid damage.
Switch off the power and disconnect the Power Cord.
1. Remove Tray 1.
2. Remove the Print Cartridge and store in safe place.
3. Remove the Front Cover Assembly
4. Remove the Left Front Cover
5. Disconnect P/J41, P/J42, P/J43, P/J44, P/J45 and P/J231 from the Connector PWB
ure 1).
6. Remove the three screws that secure the Connector PWB to the printer
7. Remove the Connector PWB
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-61
CAUTION
WARNING
(REP 1.6).
(REP 1.7).
(Figure 1).
Figure 1 Connector PWB
REP 9.6, REP 9.7
(Fig-
(Figure 1).
Repair-Adjustment