Xerox DocuPrint N2125 Service Manual page 314

Print Engine Controller PWB <=> Exit Sensor, and Rear Interlock
Switch (Figure 11) (Table 7)
Figure 11 Print Engine Controller PWB <=> Exit Sensor <=> Rear Interlock Switch
Print Engine Controller PWB <=> Exit Sensor, and Rear Interlock Switch Assembly
Table 7 shows the signal names for the Print Engine Controller PWB <=> Exit Sensor, and
Rear Interlock Switch Assembly path:
Table 7 Signal Names
Signal Name Description
/FSTK Signal from the Stack Full Sensor. This signal is Low (0V) when the Full
Stack Sensor is actuated, and High (3.3V) when deactuated
24V EXIT MOT Signal from the Rear Interlock Switch Assembly. Goes Low (0V) when
the Cover Rear is open and breaks the 24VDC circuit for the Exit Motor
Assembly.
Wiring Data
Base Engine
02/2000
7-14
Initial Issue
DocuPrint N2125