REP 13.11 Gear Cover
Parts List on
PL 12.2
Removal
Switch off the power and disconnect the Power Cord.
1.
Remove the Envelope Feeder from the printer.
2.
Remove the Bottom Cover
(REP
13.1).
3.
Remove the Top Chute
(REP
13.2).
4.
Remove the Envelope Feeder PWB
5.
Remove the two screws that secure the Gear Cover on the feeder
6.
Disconnect P/J416 from the Feed Clutch
7.
Remove the cover.
Figure 1 Gear Cover
Replacement
1.
Reinstall the components in the reverse order.
Repair-Adjustment
REP 13.11, REP 13.12
WARNING
(REP
13.3).
(Figure
1).
(Figure
1).
REP 13.12 Feed Clutch
Parts List on
PL 12.2
Removal
Switch off the power and disconnect the Power Cord.
1.
Remove the Envelope Feeder from the printer.
2.
Remove the Bottom Cover
(REP
3.
Remove the Top Chute
(REP
4.
Remove the Envelope Feeder PWB
5.
Remove the Gear Cover
(REP
6.
Remove the Torque Clutch
(Figure
7.
Remove the Feed Clutch
(Figure
Replacement
1.
Reinstall the components in the reverse order.
02/2000
4-108
WARNING
13.1).
13.2).
(REP
13.3).
13.11).
1).
2).
Figure 1 Torque Clutch
Figure 2 Feed Clutch
Initial Issue
DocuPrint N2125